Geeklog Forums

I installed geeklog with fantastico, in the new version I dled it says public_html folder, but with my install it dosnt have this folder but the files are in the folder it made when fantastcio installed geeklog

what do I do plus I am getting many errors, like it cant find the commonlib file when it is there

Warning: main(/home/jipyipy/public_html/credit/system/lib-syndication.php): failed to open stream: No such file or directory in /home/jipyipy/public_html/credit/lib-common.php on line 157

Fatal error: main(): Failed opening required '/home/jipyipy/public_html/credit/system/lib-syndication.php' (include_path='.:/usr/lib/php:/usr/local/lib/php') in /home/jipyipy/public_html/credit/lib-common.php on line 157

nice to have ppl not help

It's hard for us to help with nonstandard geeklog installs. I have never used fantastico. If you want me to help, you are going to have to be more specific concerning your directory structure. What is the path to your config.php file? Your lib-common.php file? Your system/ folder?

You could also try fantastico support since they understand their installs better.

// $Id: config.php,v 1.110 2004/03/14 20:38:32 dhaun Exp $

// When setting up Geeklog for the first time, you need to make sure the
// settings in the following 3 sections are correct:
// (1) Database Settings
// (2) Paths
// (3) Site Settings
// You can adjust the other settings once your site is up and running.

// +---------------------------------------------------------------------------+
// | (1) Database Settings |
// +---------------------------------------------------------------------------+

$_DB_host = 'localhost'; // host name or IP address of your DB server
$_DB_name = 'jipyipy_gklg1'; // name of your database,
// must exist before running the installer!
$_DB_user = 'jipyipy_gklg1'; // MySQL user name
$_DB_pass = 'password'; // MySQL password

// The table prefix is prepended to each table used be Geeklog to avoid name
// collisions with other tables that may already exist in your database.
$_DB_table_prefix = 'gl_'; // e.g. 'gl_'


// +---------------------------------------------------------------------------+
// | (2) Paths |
// +---------------------------------------------------------------------------+

// Note for Windows users: It's safe to use the forward slash '/' instead of
// the backslash '' in paths. Make sure each path starts with a drive letter!

// This should point to the directory where your config.php file resides.
$_CONF['path'] = '/home/jipyipy/public_html/credit/'; // should end in a slash

// You only need to change this if you moved or renamed the public_html
// directory. In that case, you should specify the complete path to the
// directory (i.e. without the $_CONF['path']) like this:
// $_CONF['path_html'] = '/path/to/your/public_html/';
$_CONF['path_html'] = $_CONF['path'] . '';


// +---------------------------------------------------------------------------+
// | (3) Site Settings |
// +---------------------------------------------------------------------------+

// Make sure this is the correct URL to your site, i.e. to where Geeklog's
// index.php file resides (no trailing slash).
$_CONF['site_url'] = 'http://sg-world.net/credit';

// Some hosting services have a preconfigured admin directory. In that case,
// you need to rename Geeklog's admin directory to something like "myadmin"
// and change the following URL as well. Leave as is until you experience any
// problems accessing Geeklog's admin menu.
$_CONF['site_admin_url'] = $_CONF['site_url'] . '/admin';

// This is the return address for all email sent by Geeklog:
$_CONF['site_mail'] = 'jipyipy@sg-world.net';

$_CONF['site_name'] = 'sg-world.net';
$_CONF['site_slogan'] = 'Find the credit you need';

// ****************************************************************************
// * If you set up Geeklog for the first time, you shouldn't need to change *
// * anything below this line. Come back here once the site is up and running.*
// ****************************************************************************


// Note: See the file docs/config.html for more information on the settings.

// +---------------------------------------------------------------------------+
// | OTHER PATH SETTINGS |
// | |
// | All paths must have a trailing slash ('/'). |
// +---------------------------------------------------------------------------+

// you shouldn't need to edit theses
$_CONF['path_system'] = $_CONF['path'] . 'system/';
$_CONF['path_log'] = $_CONF['path'] . 'logs/';
$_CONF['path_language'] = $_CONF['path'] . 'language/';
$_CONF['backup_path'] = $_CONF['path'] . 'backups/';

// If you set path_images to something other than the default, you will need to
// make sure that you add the following subdirectories to that directory:
// articles/, userphotos/
$_CONF['path_images'] = $_CONF['path_html'] . 'images/';



* WARNING: put any custom hacks in lib-custom.php and not in here. This file is
* modified frequently by the Geeklog development team. If you put your hacks in
* lib-custom.php you will find upgrading much easier.
*
*/

/**
* Turn this on go get various debug messages from the code in this library
* @global Boolean $_COM_VERBOSE
*/

$_COM_VERBOSE = false;

/**
* Configuration Include: You should ONLY have to modify this line.
* Leave the rest of this file intact!
*
* Make sure to include the name of the config file,
* i.e. the path should end in .../config.php
*/

require_once( '/home/jipyipy/public_html/credit/config.php' );



// Before we do anything else, check to ensure site is enabled

if( isset( $_CONF['site_enabled'] ) && !$_CONF['site_enabled'] )
{
if( empty( $_CONF['site_disabled_msg'] ))
{
echo $_CONF['site_name'] . ' is temporarily down. Please check back soon';
}
else
{
// if the msg starts with http: assume it's a URL we should redirect to
if( preg_match( "/^(https?):/", $_CONF['site_disabled_msg'] ) === 1 )
{
echo COM_refresh( $_CONF['site_disabled_msg'] );
}
else
{
echo $_CONF['site_disabled_msg'];
}
}

exit;
}

// this file can't be used on its own - redirect to index.php
if( eregi( 'lib-common.php', $PHP_SELF ))
{
echo COM_refresh( $_CONF['site_url'] . '/index.php' );
exit;
}

and fantastico dont have any support

You didn't really answer my questions.

Well,
$_CONF['path_html'] = $_CONF['path'] . '';

Immediately jumps out at me as being incorrect.

Try
$_CONF['path_html'] = $_CONF['path'];

if your lib-common and config.php are really in the same directory.

/* Reminder: always indent with 4 spaces (no tabs). */
// +---------------------------------------------------------------------------+
// | Geeklog 1.3 |
// +---------------------------------------------------------------------------+
// | config.php |
// | |
// | Geeklog configuration file. |
// +---------------------------------------------------------------------------+
// | Copyright (C) 2001-2004 by the following authors: |
// | |
// | Authors: Tony Bibbs - tony@tonybibbs.com |
// | Dirk Haun - dirk@haun-online.de |
// +---------------------------------------------------------------------------+
// | |
// | This program is free software; you can redistribute it and/or |
// | modify it under the terms of the GNU General Public License |
// | as published by the Free Software Foundation; either version 2 |
// | of the License, or (at your option) any later version. |
// | |
// | This program is distributed in the hope that it will be useful, |
// | but WITHOUT ANY WARRANTY; without even the implied warranty of |
// | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
// | GNU General Public License for more details. |
// | |
// | You should have received a copy of the GNU General Public License |
// | along with this program; if not, write to the Free Software Foundation, |
// | Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
// | |
// +---------------------------------------------------------------------------+
// | See the docs/install.html and docs/config.html files for more information |
// | on configuration. |
// +---------------------------------------------------------------------------+
//
// $Id: config.php,v 1.110 2004/03/14 20:38:32 dhaun Exp $

// When setting up Geeklog for the first time, you need to make sure the
// settings in the following 3 sections are correct:
// (1) Database Settings
// (2) Paths
// (3) Site Settings
// You can adjust the other settings once your site is up and running.

// +---------------------------------------------------------------------------+
// | (1) Database Settings |
// +---------------------------------------------------------------------------+

$_DB_host = 'localhost'; // host name or IP address of your DB server
$_DB_name = 'jipyipy_geek'; // name of your database,
// must exist before running the installer!
$_DB_user = 'jipyipy_geek'; // MySQL user name
$_DB_pass = ''; // MySQL password

// The table prefix is prepended to each table used be Geeklog to avoid name
// collisions with other tables that may already exist in your database.
$_DB_table_prefix = 'gl_'; // e.g. 'gl_'


// +---------------------------------------------------------------------------+
// | (2) Paths |
// +---------------------------------------------------------------------------+

// Note for Windows users: It's safe to use the forward slash '/' instead of
// the backslash '' in paths. Make sure each path starts with a drive letter!

// This should point to the directory where your config.php file resides.
$_CONF['path'] = '/home/jipyipy/public_html/credit/'; // should end in a slash

// You only need to change this if you moved or renamed the public_html
// directory. In that case, you should specify the complete path to the
// directory (i.e. without the $_CONF['path']) like this:
// $_CONF['path_html'] = '/path/to/your/public_html/';
$_CONF['path_html'] = $_CONF['path'] . 'public_html/';


// +---------------------------------------------------------------------------+
// | (3) Site Settings |
// +---------------------------------------------------------------------------+

// Make sure this is the correct URL to your site, i.e. to where Geeklog's
// index.php file resides (no trailing slash).
$_CONF['site_url'] = 'http://sg-world.net/credit';

// Some hosting services have a preconfigured admin directory. In that case,
// you need to rename Geeklog's admin directory to something like "myadmin"
// and change the following URL as well. Leave as is until you experience any
// problems accessing Geeklog's admin menu.
$_CONF['site_admin_url'] = $_CONF['site_url'] . '/admin';

// This is the return address for all email sent by Geeklog:
$_CONF['site_mail'] = 'jipyipy@sg-world.net';

// Name and slogan of your site
$_CONF['site_name'] = 'Credit.sg-world.net';
$_CONF['site_slogan'] = 'Find the credit you need';


// ****************************************************************************
// * If you set up Geeklog for the first time, you shouldn't need to change *
// * anything below this line. Come back here once the site is up and running.*
// ****************************************************************************


// Note: See the file docs/config.html for more information on the settings.

// +---------------------------------------------------------------------------+
// | OTHER PATH SETTINGS |
// | |
// | All paths must have a trailing slash ('/'). |
// +---------------------------------------------------------------------------+

// you shouldn't need to edit theses
$_CONF['path_system'] = $_CONF['path'] . 'system/';
$_CONF['path_log'] = $_CONF['path'] . 'logs/';
$_CONF['path_language'] = $_CONF['path'] . 'language/';
$_CONF['backup_path'] = $_CONF['path'] . 'backups/';

// If you set path_images to something other than the default, you will need to
// make sure that you add the following subdirectories to that directory:
// articles/, userphotos/
$_CONF['path_images'] = $_CONF['path_html'] . 'images/';

// +---------------------------------------------------------------------------+
// | PEAR Settings |
// | |
// | Geeklog uses PEAR to send emails (see "Email Settings" below). Here you |
// | can tell Geeklog whether to use the PEAR packages installed on your |
// | server or to use the included packages. |
// +---------------------------------------------------------------------------+

// If your server is running PHP 4.3.0 (or newer) then chances are that PEAR
// is already installed and you can change this to: $_CONF['have_pear'] = true;
$_CONF['have_pear'] = false;

// Geeklog comes with the necessary PEAR packages and will pick them up from
// the following directory if $_CONF['have_pear'] = false (above).
$_CONF['path_pear'] = $_CONF['path_system'] . 'pear/';

// +---------------------------------------------------------------------------+
// | Email Settings |
// | |
// | Configure how Geeklog sends email: Via PHP's mail() function, sendmail, |
// | or via an SMTP server. |
// +---------------------------------------------------------------------------+

// To send email from Geeklog, you will need to select one of the following
// email backends:
// - 'mail', i.e. use PHP's built-in mail() function
// - 'sendmail', i.e. use the sendmail utility
// - 'smtp', i.e. talk directly to your SMTP server
// The default is 'mail' and will work in most environments.

$_CONF['mail_settings'] = array (
'backend' => 'mail', // can be one of 'mail', 'sendmail', 'smtp'

// sendmail parameters (for 'backend' => 'sendmail')
'sendmail_path' => '/usr/bin/sendmail',
'sendmail_args' => '',

// SMTP parameters (for 'backend' => 'smtp')
'host' => 'smtp.example.com',
'port' => '25',
'auth' => false,
'username' => 'smtp-username',
'password' => 'smtp-password'
);

// +---------------------------------------------------------------------------+
// | OTHER DATABASE SETTINGS |
// | |
// | Database type and database backup settings. |
// +---------------------------------------------------------------------------+

$_DB_dbms = 'mysql'; // Do not change (currently, only MySQL is supported)

// optional settings for making database backups from within Geeklog
$_CONF['allow_mysqldump'] = 1; // 1 = on, 0 = off
$_DB_mysqldump_path = '/usr/bin/mysqldump'; // path to mysqldump binary
$_CONF['mysqldump_options'] = '-Q'; // additional options for mysqldump

// +---------------------------------------------------------------------------+
// | SITE SETTINGS |
// | |
// | These settings help define your Geeklog site. |
// +---------------------------------------------------------------------------+
$_CONF['theme'] = 'XSilver'; // default theme

// you shouldn't need to edit the following
$_CONF['layout_url'] = $_CONF['site_url'] . '/layout/' . $_CONF['theme'];
$_CONF['path_themes'] = $_CONF['path_html'] . 'layout/';
$_CONF['path_layout'] = $_CONF['path_themes'] . $_CONF['theme'] . '/';

// optional settings (1 = on, 0 = off)
$_CONF['allow_user_themes'] = 1;
$_CONF['allow_user_language'] = 1;
$_CONF['allow_user_photo'] = 1; // allow users to upload self-photo

// hides the list of authors from the preferences
$_CONF['hide_author_exclusion'] = 0;


// +---------------------------------------------------------------------------+
// | Support for custom user registration form and account details |
// | Requires custom functions to be written that can be placed in lib-custom |
// | Function hooks are in users.php, usersettings.php and admin/user.php |
// +---------------------------------------------------------------------------+
$_CONF['custom_registration'] = false; // Set to true if you have custom code


// +---------------------------------------------------------------------------+
// | LOCALE SETTINGS |
// | |
// | see docs/config.html#locale for details |
// +---------------------------------------------------------------------------+
$_CONF['language'] = 'english';
$_CONF['locale'] = 'en-gb';
$_CONF['date'] = '%A, %B %d %Y @ %I:%M %p %Z';
$_CONF['daytime'] = '%m/%d %I:%M%p';
$_CONF['shortdate'] = '%x';
$_CONF['dateonly'] = '%d-%b';
$_CONF['timeonly'] = '%I:%M %p %Z';
$_CONF['default_charset'] = 'iso-8859-1';

// +---------------------------------------------------------------------------+
// | SITE STATUS |
// | |
// | To disable your Geeklog site quickly, simply set this flag to false |
// +---------------------------------------------------------------------------+
$_CONF['site_enabled'] = true; // true or false

// Message shown when site is down
// When this starts with 'http:' visitors are redirected to that URL
$_CONF['site_disabled_msg'] = 'Geeklog Site is down. Please come back soon.';

// +---------------------------------------------------------------------------+
// | SESSION SETTINGS |
// | |
// | cookie_ip will store md5(remoteip + randomnum) as the session ID in the |
// | cookie. This is more secure but will more than likely require dialed up |
// | users to login each and every time. If ipbasedsessid is turned off |
// | (which it is by default) it will just store a random number as the |
// | session ID in the cookie. |
// | |
// | default_perm_cookie_timeout is how long you want the permanent cookie |
// | to persist for (in seconds). This can be overridden by the user in |
// | their user prefs if they want. If you set the default to 0, users will |
// | have to log in again once their session expired. |
// | |
// | session_cookie_time is how long you want the session cookie to persist |
// | for. Only really useful in scenarios where you don't want to allow |
// | permanent cookies |
// +---------------------------------------------------------------------------+

$_CONF['cookie_session'] = 'gl_session';
$_CONF['cookie_name'] = 'geeklog';
$_CONF['cookie_password'] = 'password';
$_CONF['cookie_theme'] = 'theme';
$_CONF['cookie_language'] = 'language';
$_CONF['cookie_lastvisit'] = 'LastVisit';
$_CONF['cookie_lastvisittemp'] = 'LastVisitTemp';

$_CONF['cookie_ip'] = 0;
$_CONF['default_perm_cookie_timeout'] = 28800;
$_CONF['session_cookie_timeout'] = 7200;
$_CONF['cookie_path'] = '/';
$_CONF['cookiedomain'] = ''; // e.g. '.example.com'
$_CONF['cookiesecure'] = 0;

// Set to false if you don't want to store last login data and time in the userinfo table
$_CONF['lastlogin'] = true;

// +---------------------------------------------------------------------------+
// | This is really redundant but I am including this as a reminder that those |
// | people writing Geeklog Plug-ins that are OS dependent should check either |
// | the $_CONF variable below or PHP_OS directly. If you are writing an |
// | addon that is OS specific your addon should check the system is using the |
// | right OS. If not, be sure to show a friendly message that says their GL |
// | distro isn't running the right OS. Do not modify this value |
// +---------------------------------------------------------------------------+

$_CONF['ostype'] = PHP_OS;

// +---------------------------------------------------------------------------+
// | SEARCH SETTINGS |
// | |
// | These aren't really used at the moment - leave as is ... |
// +---------------------------------------------------------------------------+

// Indicates if we should expand search results or not.
// true = show title with summary
// false = title date author hits on one line
$_CONF['expanded_search_results'] = true;

// 0: use users max stories per page
// 1: Show all
// any other number is the # of results per page
$_CONF['max_search_results'] = 1;

// maximum length for the summary text for search results should be
$_CONF['summary_length'] = 250;


// +---------------------------------------------------------------------------+
// | MISCELLANEOUS SETTINGS |
// | |
// | These are other various Geeklog settings. The defaults should work OK |
// | for most situations. |
// +---------------------------------------------------------------------------+

// this lets you select which functions are available for registered users only
$_CONF['loginrequired'] = 0; // all of them, if set to 1 will override all else
$_CONF['submitloginrequired'] = 0;
$_CONF['commentsloginrequired'] = 0;
$_CONF['linksloginrequired'] = 0;
$_CONF['pollsloginrequired'] = 0;
$_CONF['calendarloginrequired'] = 0;
$_CONF['statsloginrequired'] = 0;
$_CONF['searchloginrequired'] = 0;
$_CONF['profileloginrequired'] = 0;
$_CONF['emailuserloginrequired'] = 0;
$_CONF['emailstoryloginrequired'] = 0;

// Submission Settings

// enable (set to 1) or disable (set to 0) submission queues:
$_CONF['storysubmission'] = 1;
$_CONF['linksubmission'] = 1;
$_CONF['eventsubmission'] = 1;
$_CONF['usersubmission'] = 0;

// When set to 1, this will display an additional block on the submissions page
// that lists all stories that have the 'draft' flag set.
$_CONF['listdraftstories'] = 0;

// Send an email notification when a new submission has been made. The contents
// of the array can be any combination of 'story', 'link', 'event', and 'user'.
// Example: $_CONF['notification'] = array ('story', 'link', 'event');
// The email will be sent to $_CONF['site_mail'] (see above).
$_CONF['notification'] = array ();

$_CONF['postmode'] = 'plaintext'; // can be 'plaintext' or 'html'
$_CONF['speedlimit'] = 45; // in seconds
$_CONF['skip_preview'] = 0; // If = 1, allow user to submit comments and stories without previewing

// Allow users to change their username (if set to 1).
$_CONF['allow_username_change'] = 0;

// Allow users to delete their account (if set to 1).
$_CONF['allow_account_delete'] = 0;


// Topic Settings

// Topics can be assigned a sort number so that you can control what order they
// appear in the 'Topics' block on the homepage. If you prefer you can also
// have this sort alphabetically by changing the value to 'alpha' (default is
// by 'sortnum'

$_CONF['sortmethod'] = 'sortnum'; // or 'alpha'

// Show the number of stories in a topic in Topics Block
$_CONF['showstorycount'] = 1;

// Show the number of story submissions for a topic in Topics Block
$_CONF['showsubmissioncount'] = 1;

// Hide 'Home' link from Topics block (if set to 1)
$_CONF['hide_home_link'] = 0;

// Show blocks for empty search results
$_CONF['showemptysearchresults'] = 0;

// How long an anonymous (guest) user session is good for
$_CONF['whosonline_threshold'] = 300; // in seconds


// "Daily Digest" settings

// Let users get stories emailed to them
// Requires cron and the use of php as a shell script
$_CONF['emailstories'] = 0;

// Specify length of stories in those emails:
// 0 = send only title + link, 1 = send entire introtext,
// any other number = max. number of characters per story
$_CONF['emailstorieslength'] = 1;

// New users get stories emailed to them per default (= 1) or not (= 0)
$_CONF['emailstoriesperdefault'] = 0;


// When user submission is activated, allow users from these domains to
// register without having to go through the submission queue.
$_CONF['allow_domains'] = ''; // e.g. 'mycompany.com,myothercompany.com'

// Following times are in seconds
$_CONF['newstoriesinterval'] = 86400; // = 24 hours
$_CONF['newcommentsinterval'] = 172800; // = 48 hours
$_CONF['newlinksinterval'] = 1209600; // = 14 days

// Set to 1 to hide a section from the What's New block:
$_CONF['hidenewstories'] = 0;
$_CONF['hidenewcomments'] = 0;
$_CONF['hidenewlinks'] = 0;
$_CONF['hidenewplugins'] = 0;

// Calendar Settings
$_CONF['personalcalendars'] = 1;
$_CONF['showupcomingevents'] = 1;
$_CONF['upcomingeventsrange'] = 14; // days
$_CONF['event_types'] = 'Anniversary,Appointment,Birthday,Business,Education,Holiday,Meeting,Miscellaneous,Personal,Phone Call,Special Occasion,Travel,Vacation';

// Story Settings
$_CONF['maximagesperarticle'] = 5;
$_CONF['limitnews'] = 10;
$_CONF['minnews'] = 1; // minimum number of stories per page
$_CONF['contributedbyline'] = 1; // If 1, show contributed by line
$_CONF['article_image_align'] = 'right'; // Topic icon on left or right.
$_CONF['hideemailicon'] = 0; // If 1, hide "email story" option
$_CONF['hideprintericon'] = 0; // If 1, hide "printer friendly" option

// When set to 1, this will render the first story on any page using the
// templates for featured stories - even if that story is not featured.
$_CONF['showfirstasfeatured'] = 0;

// +---------------------------------------------------------------------------+
// | RSS feed settings |
// | |
// | Settings for RSS feeds (aka RDF feeds). Please note that most of these |
// | are merely default settings for the feeds created from the "Content |
// | Syndication" entry in the Admin's menu. |
// +---------------------------------------------------------------------------+

$_CONF['backend'] = 1; // 1 = activate feeds, 0 = off

// path to your site's default RSS feed
$_CONF['rdf_file'] = $_CONF['path_html'] . 'backend/geeklog.rdf';

// This allows a person to limit the rss feed to a certain number of stories
// (e.g. 10 or 12) or else limit the rss feed to all stories within a certain
// period of time in hours (e.g. 24h or 168h).
$_CONF['rdf_limit'] = 10; // number of stories (10) or hours (24h)

// Include the story's entire intro text in the feed (= 1) or limit the number
// of characters from the intro text (any number > 1) or don't include the text
// at all (= 0).
$_CONF['rdf_storytext'] = 0;

// Default language for the feed - may have to be different than the locale
$_CONF['rdf_language'] = 'en-gb';


// Uncomment the following line to set the copyright year in the site's footer
// to a specific year. Otherwise, the current year will be used.
// $_CONF['copyrightyear'] = '2004';


// Optional Image Settings

// If you set $_CONF['image_lib'] below, you must supply a path for the library
// you will use. Setting this also assumes that if a photo is uploaded that is
// too big either by the image sizes below or by overriding them using the
// upload object then the library you choose will attempt to resize the image.
// Leaving this value empty disables this feature
$_CONF['image_lib'] = ''; // can be one of 'netpbm', 'imagemagick', 'gdlib'

// If you set image_lib to imagemagick give this path otherwise comment it out
// NOTE: you will need a fairly recent version of ImageMagick for this to work.
// ImageMagick version 5.4.9 (or newer) is recommended.
//$_CONF['path_to_mogrify'] = '/path/to/mogrify';

// If you set image_lib to netpbm give the path to the netpbm directory, you
// need the trailing slash here.
// NOTE: if you use NETPBM, use the latest package from the Gallery package for
// your operating system found at http://sourceforge.net/projects/gallery in
// the download section. You need to take the netpbm tarball from them and
// uncompress the file which will create a netpbm directory. If you plan to
// only use netpbm with Geeklog, put that entire folder in /path/to/geeklog and
// adjust the path below. The only programs you need from netpbm are giftopnm,
// jpegtopnm, pngtopnm, ppmtogif, ppmtojpeg, pnmtopng and pnmscale
//$_CONF['path_to_netpbm'] = '/path/to/netpbm/';

// Uncomment the following line if you experience problems with the image
// upload. Debug messages will be added to the error.log file.
// $_CONF['debug_image_upload'] = true;

// When set to 1, Geeklog will keep the original, unscaled images and make
// the smaller image link to the unscaled image.
$_CONF['keep_unscaled_image'] = 0; // 1 = keep original images

// Story image settings
$_CONF['max_image_width'] = 300; // In pixels
$_CONF['max_image_height'] = 300; // In pixels
$_CONF['max_image_size'] = 1048576; // 1048576 = 1MB

// User photo settings
$_CONF['max_photo_width'] = 96; // In pixels
$_CONF['max_photo_height'] = 96; // In pixels
$_CONF['max_photo_size'] = 65536; // 65536 = 64KB

// Comment Settings
$_CONF['commentspeedlimit'] = 45;
$_CONF['comment_limit'] = 100; // Default Number of Comments under Story
$_CONF['comment_mode'] = 'threaded'; // Default Comment Mode; from 'threaded','nested','nocomments',and 'flat'
// Allow / disallow comments to stories by default (can be changed individually for every story)
$_CONF['comment_code'] = 0; // 0 = comments enabled, -1 = disabled

// Poll Settings
$_CONF['maxanswers'] = 10;
// 'submitorder' is order answers are saved in admin/poll.php
// 'voteorder' will list answers in order of number of votes (highest->lowest);
$_CONF['answerorder'] = 'submitorder';
$_CONF['pollcookietime'] = 86400;
$_CONF['polladdresstime'] = 604800;

// Password setting: minimum time between two requests for a new password
$_CONF['passwordspeedlimit'] = 300; // seconds = 5 minutes

// Links Settings
// You can set both of the following to 0 to get back the old (pre-1.3.6)
// style of the links section. Setting only linkcols to 0 will hide the
// categories but keep the paging. Setting only linksperpage to 0 will list
// all the links of the selected category on one page.
$_CONF['linkcols'] = 3; // categories per column
$_CONF['linksperpage'] = 10; // links per page

// Parameters for checking HTML tags

// *** Warning: Adding the following tags to the list of allowable HTML can
// *** make your site vulnerable to scripting attacks!
// *** Use with care:

/* This is a list of HTML tags that users are allowed to use in their posts.
* Each tag can have a list of allowed attributes (see 'a' for an example).
* Any attributes not listed will be filtered, i.e. removed.
*/
$_CONF['user_html'] = array (
'p' => array(),
'b' => array(),
'i' => array(),
'a' => array('href' => 1, 'title' => 1),
'em' => array(),
'br' => array(),
'tt' => array(),
'hr' => array(),
'li' => array(),
'ol' => array(),
'ul' => array(),
'code' => array(),
'pre' => array()
);

/* This is a list of HTML tags that Admins (site admin and story admins) can
* use in their posts. It will be merged with the above list of user-allowable
* tags ($_CONF['user_html']). You can also add tags that have already been
* listed for the user-allowed HTML, so as to allow admins to use more
* attributes (see 'p' for an example).
*/
$_CONF['admin_html'] = array (
'p' => array('class' => 1, 'id' => 1, 'align' => 1),
'div' => array('class' => 1, 'id' => 1),
'span' => array('class' => 1, 'id' => 1),
'table' => array('class' => 1, 'id' => 1, 'width' => 1, 'border' => 1,
'cellspacing' => 1, 'cellpadding' => 1),
'tr' => array('class' => 1, 'id' => 1, 'align' => 1, 'valign' => 1),
'th' => array('class' => 1, 'id' => 1, 'align' => 1, 'valign' => 1,
'colspan' => 1, 'rowspan' => 1),
'td' => array('class' => 1, 'id' => 1, 'align' => 1, 'valign' => 1,
'colspan' => 1, 'rowspan' => 1)
);

// list of protocols that are allowed in links
$_CONF['allowed_protocols'] = array ('http:', 'https:', 'ftp:');


// Parameters for checking for "bad" words
$_CONF['censormode'] = 1;
$_CONF['censorreplace'] = '*censored*';
$_CONF['censorlist'] = array('*censored*','*censored*','*censored*er','*censored*ing','*censored*','*censored*','*censored*','*censored*','*censored*','*censored*','*censored*','*censored*','*censored*ing','mother*censored*er');

// EXPERIMENTAL!
// This feature when fully implemented, will make your site crawler friendly.
// Only works with staticpages right now.
//
// Note: Works with Apache (Linux and Windows successfully tested).
// Unresolvable issues with systems running IIS; known PHP CGI bug.
$_CONF['url_rewrite'] = false; // false = off, true = on

// Define a few useful things for GL
if (!defined ('LB')) {
define('LB',"n");
}
if (!defined ('VERSION')) {
define('VERSION', '1.3.9');
}

$_STATES = array(
'--'=>'',
'AL'=>'Alabama',
'AK'=>'Alaska',
'AZ'=>'Arizona',
'AR'=>'Arkansas',
'CA'=>'California',
'CO'=>'Colorado',
'CT'=>'Connecticut',
'DE'=>'Delaware',
'DC'=>'District of Columbia',
'FL'=>'Florida',
'GA'=>'Georgia',
'HI'=>'Hawaii',
'ID'=>'Idaho',
'IL'=>'Illinois',
'IN'=>'Indiana',
'IA'=>'Iowa',
'KS'=>'Kansas',
'KY'=>'Kentucky',
'LA'=>'Louisiana',
'ME'=>'Maine',
'MD'=>'Maryland',
'MA'=>'Massachusetts',
'MI'=>'Michigan',
'MN'=>'Minnesota',
'MS'=>'Mississippi',
'MO'=>'Missouri',
'MT'=>'Montana',
'NE'=>'Nebraska',
'NV'=>'Nevada',
'NH'=>'New Hampshire',
'NJ'=>'New Jersey',
'NM'=>'New Mexico',
'NY'=>'New York',
'NC'=>'North Carolina',
'ND'=>'North Dakota',
'OH'=>'Ohio',
'OK'=>'Oklahoma',
'OR'=>'Oregon',
'PA'=>'Pennsylvania',
'RI'=>'Rhode Island',
'SC'=>'South Carolina',
'SD'=>'South Dakota',
'TN'=>'Tennessee',
'TX'=>'Texas',
'UT'=>'Utah',
'VT'=>'Vermont',
'VA'=>'Virginia',
'WA'=>'Washington',
'WV'=>'West Virginia',
'WI'=>'Wisconsin',
'WY'=>'Wyoming'
);

?>

Then why use them??

---

John