Geeklog Forums

Heres my setup.

Windows Server 2k3 SP1 running PHP5, IIS 6. I have put all the geeklog system files in M:/geeklog. all the public html files are in M:/Inetpub/wwwroot/public_html. When I go to the install page (http://192.168.1.102/public_html/admin/install/install.php). Everything shows up fine. But when I enter in the location of config.php (M:/geeklog/config.php) and hit next nothing happens. It acts like it just refreshed all fields empty again. I have created a geeklog database on MySQL.

Any ideas?

m: might be your problem.

Try more like \servernamedirectoryname

Not sure if that will help, I put apache on my win2k's at work cause I hatezzzzzz IIS

Darn .. it stripped out my slashes :-) \\servername\directoryname

It did it again ... preview was fine ... grrrrrr

\\\\servername\\directoryname

So I should share it?

Ok I shared geeklog files and public_html folder and set paths accordingly.

still not working

heres config file (192.168.1.102=apollo)


/* Reminder: always indent with 4 spaces (no tabs). */
//

+---------------------------------------------------------------------------+
// |

Geeklog 1.3 |
//

+---------------------------------------------------------------------------+
// |

config.php |
// |

|
// | Geeklog

configuration file. |
//

+---------------------------------------------------------------------------+
// |

Copyright (C) 2001-2004 by the following authors: |
// |

|
// | Authors: Tony

Bibbs - tony@tonybibbs.com |
// | Dirk Haun -

dirk@haun-online.de |
//

+---------------------------------------------------------------------------+
// |

|
// | This program is

free software; you can redistribute it and/or |
// | modify it under the

terms of the GNU General Public License |
// | as published by the Free

Software Foundation; either version 2 |
// | of the License, or (at your

option) any later version. |
// |

|
// | This program is distributed in the hope that

it will be useful, |
// | but WITHOUT ANY WARRANTY; without even the implied

warranty of |
// | MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See

the |
// | GNU General Public License for more details.

|
// |

|
// | You should have received a copy of the GNU General Public License |
// |

along with this program; if not, write to the Free Software Foundation, |
// | Inc., 59

Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
// |

|
//

+---------------------------------------------------------------------------+
// | See

the docs/install.html and docs/config.html files for more information |
// | on

configuration. |
//

+---------------------------------------------------------------------------+
//
// $Id:

config.php,v 1.146 2004/11/28 09:54:06 dhaun Exp $

// When setting up Geeklog for the

first time, you need to make sure the
// settings in the following 3 sections are

correct:
// (1) Database Settings
// (2) Paths
// (3) Site Settings
// You can adjust the

other settings once your site is up and running.

//

+---------------------------------------------------------------------------+
// | (1)

Database Settings |
//

+---------------------------------------------------------------------------+

$_DB_host

= 'localhost'; // host name or IP address of your DB server
$_DB_name =

'geeklog'; // name of your database,
// must exist

before running the installer!
$_DB_user = 'root'; // MySQL user name
$_DB_pass

= 'Cassie23'; // MySQL password

// The table prefix is prepended to each

table used by Geeklog to avoid name
// collisions with other tables that may already

exist in your database.
$_DB_table_prefix = 'gl_'; // e.g. 'gl_'


//

+---------------------------------------------------------------------------+
// | (2)

Paths |
//

+---------------------------------------------------------------------------+

// Note

for Windows users: It's safe to use the forward slash '/' instead of
// the backslash ''

in paths. Make sure each path starts with a drive letter!

// This should point to the

directory where your config.php file resides.
$_CONF['\apollogeeklog'] =

'\apollogeeklog'; // should end in a slash

// You only need to change this if you

moved or renamed the public_html
// directory. In that case, you should specify the

complete path to the
// directory (i.e. without the $_CONF['\apollogeeklog']) like

this:
// $_CONF['\apolloInetpubwwwrootpublic_html'] =

'\apolloInetpubwwwrootpublic_html';
$_CONF['\apolloInetpubwwwrootpublic_html']

= $_CONF['\apollogeeklog'] . '\apolloInetpubwwwrootpublic_html';


//

+---------------------------------------------------------------------------+
// | (3)

Site Settings |
//

+---------------------------------------------------------------------------+

// Make

sure this is the correct URL to your site, i.e. to where Geeklog's
// index.php file

resides (no trailing slash).
$_CONF['site_url'] = 'http://apollo/index.php/';

// Some hosting services have a preconfigured admin directory. In that case,
// you need

to rename Geeklog's admin directory to something like "myadmin"
// and change the

following URL as well. Leave as is until you experience any
// problems accessing

Geeklog's admin menu.
$_CONF['http://apollo/admin/'] = $_CONF['site_url'] .

'http://apollo/admin';

// This is the return address for all email sent by Geeklog:
$_CONF['site_mail'] = 'admin@example.com';

// Name and slogan of your site
$_CONF['site_name'] = 'Geeklog Site';
$_CONF['site_slogan'] = 'Another

Nifty Geeklog Site';


//

****************************************************************************
// * If you

set up Geeklog for the first time, you shouldn't need to change *
// * anything below

this line. Come back here once the site is up and running.*
//

****************************************************************************


// Note:

See the file docs/config.html for more information on the settings.

//

+---------------------------------------------------------------------------+
// | OTHER

PATH SETTINGS |
// |

|
// | All paths must have a

trailing slash ('/'). |
//

+---------------------------------------------------------------------------+

// you

shouldn't need to edit theses
$_CONF['\apollogeeklogsystem/'] =

$_CONF['\apollogeeklog'] . 'system/';
$_CONF['\apollo/geeklog/logs/'] =

$_CONF['\apollogeeklog/'] . 'logs/';
$_CONF['\apollo/geeklog/language/'] =

$_CONF['\apollo/geeklog/'] . 'language/';
$_CONF['\apollo/geeklog/backups/'] =

$_CONF['\apollo/geeklog/'] . 'backups/';
$_CONF['\apollo/geeklog/data/'] =

$_CONF['\apollo/geeklog/'] . 'data/';

// If you set path_images to something other than

the default, you will need to
// make sure that you add the following subdirectories to

that directory:
// articles/, userphotos/
$_CONF['\apollo/Inetpub/wwwroot/public_html/images/'] =

$_CONF['\apollo/Inetpub/wwwroot/public_html/'] . 'images/';

//

+---------------------------------------------------------------------------+
// | PEAR

Settings |
// |

|
// | Geeklog uses PEAR to

send emails (see "Email Settings" below). Here you |
// | can tell Geeklog whether to

use the PEAR packages installed on your |
// | server or to use the included

packages. |
//

+---------------------------------------------------------------------------+

// If your

server is running PHP 4.3.0 (or newer) then chances are that PEAR
// is already installed

and you can change this to: $_CONF['have_pear'] = true;
$_CONF['have_pear'] = false;

//

Geeklog comes with the necessary PEAR packages and will pick them up from
// the

following directory if $_CONF['have_pear'] = false (above).
$_CONF['path_pear'] =

$_CONF['path_system'] . 'pear/';

//

+---------------------------------------------------------------------------+
// | Email

Settings |
// |

|
// | Configure how Geeklog

sends email: Via PHP's mail() function, sendmail, |
// | or via an SMTP server.

|
//

+---------------------------------------------------------------------------+

// To send

email from Geeklog, you will need to select one of the following
// email backends:
// -

'mail', i.e. use PHP's built-in mail() function
// - 'sendmail', i.e. use the sendmail

utility
// - 'smtp', i.e. talk directly to your SMTP server
// The default is 'mail' and

will work in most environments.

$_CONF['mail_settings'] = array (
'backend' =>

'mail', // can be one of 'mail', 'sendmail', 'smtp'

// sendmail parameters (only

needed for 'backend' => 'sendmail')
'sendmail_path' => '/usr/bin/sendmail',


'sendmail_args' => '',

// SMTP parameters (only needed for 'backend' => 'smtp')


'host' => 'smtp.example.com',
'port' => '25',
'auth' => false,


'username' => 'smtp-username',
'password' => 'smtp-password'
);

//

+---------------------------------------------------------------------------+
// | OTHER

DATABASE SETTINGS |
// |

|
// | Database type and

database backup settings. |
//

+---------------------------------------------------------------------------+

$_DB_dbms

= 'mysql'; // Do not change (currently, only MySQL is supported)

// optional settings

for making database backups from within Geeklog
$_CONF['allow_mysqldump'] = 1; //

1 = on, 0 = off

// full path to mysqldump executable (Windows users: add ".exe"!)
$_DB_mysqldump_path = '/usr/bin/mysqldump';

// additional options for mysqldump
// If

you're using InnoDB tables, include the '--single-transaction' or you
// may end up with

inconsistent backups!
$_CONF['mysqldump_options'] = '-Q';

//

+---------------------------------------------------------------------------+
// | SITE

SETTINGS |
// |

|
// | These settings help

define your Geeklog site. |
//

+---------------------------------------------------------------------------+
$_CONF['M:/Inetpub/wwwroot/public_html/layout/'] = 'professional'; //

default theme

// List of entries that you want to see in the site's menu bar (if you're

using
// a theme that uses the {menu_elements} variable in its header.thtml).
// Choose

any combination of the following (order here = order in the menu).
$_CONF['menu_elements'] = array
(
// 'home', // link to homepage


'contribute', // contribute / "submit a story" link
'links', // link to the

links section (aka web resources)
'polls', // link to past polls


'calendar', // link to the site calendar
'search', // link to advanced

search
'stats', // link to site stats
// 'prefs', // link to user's

preferences
'plugins' // links added by plugins, like {plg_menu_elements}


// 'custom' // for custom links (see lib-custom.php)
);

// you shouldn't need to

edit the following
$_CONF['layout_url'] = $_CONF['site_url'] . '/layout/' .

$_CONF['theme'];
$_CONF['path_themes'] = $_CONF['path_html'] . 'layout/';
$_CONF['path_layout'] = $_CONF['path_themes'] . $_CONF['theme'] . '/';

// optional

settings (1 = on, 0 = off)
$_CONF['allow_user_themes'] = 1;
$_CONF['allow_user_language'] = 1;
$_CONF['allow_user_photo'] = 1; // allow users to

upload self-photo

// Allow users to change their username (if set to 1).
$_CONF['allow_username_change'] = 0;

// Allow users to delete their account (if set to

1).
$_CONF['allow_account_delete'] = 0;

// hides the list of authors from the

preferences
$_CONF['hide_author_exclusion'] = 0;

// Used by COM_displayName to return

Members's Full Name else username (1 = yes, 0 = no)
$_CONF['show_fullname'] = 0;

//

+---------------------------------------------------------------------------+
// |

Support for custom user registration form and account details |
// | Requires

custom functions to be written that can be placed in lib-custom |
// | Function hooks

are in users.php, usersettings.php and admin/user.php |
//

+---------------------------------------------------------------------------+
$_CONF['custom_registration'] = false; // Set to true if you have custom code

//

+---------------------------------------------------------------------------+
// | Define

action to be taken by SPAMX module if spam detected |
// | Current SPAMX

module supports two actions which can be combined |
// | Additional classes can

be added as well as other plugin extensions |
// | Actions: 128 = ignore comment

and redirect to homepage |
// | 8 = mail admin message

|
// | 136 (SUM) ignore and email adming

|
//

+---------------------------------------------------------------------------+
$_CONF['spamx'] = 128; // Default to ignore comment.

//

+---------------------------------------------------------------------------+
// |

Support for custom templaes to support advanced Rich Text Editor |
// | Checked

in comment.php, submit.php, admin/story.php and |
// |

staticpages/index.php. If set true and advanced template exists |
//

+---------------------------------------------------------------------------+
$_CONF['advanced_editor'] = false;

//

+---------------------------------------------------------------------------+
// | LOCALE

SETTINGS |
// |

|
// | see

docs/config.html#locale for details |
//

+---------------------------------------------------------------------------+
$_CONF['language'] = 'english';
$_CONF['locale'] = 'en-gb';
$_CONF['date'] = '%A, %B %d %Y @ %I:%M %p %Z';
$_CONF['daytime'] =

'%m/%d %I:%M%p';
$_CONF['shortdate'] = '%x';
$_CONF['dateonly'] = '%d-%b';
$_CONF['timeonly'] = '%I:%M%p';
$_CONF['week_start'] = 'Sun'; // can be 'Sun'

or 'Mon'
$_CONF['default_charset'] = 'iso-8859-1';

// "Timezone Hack"
// If your

webserver is located in a different timezone than yourself but you
// prefer Geeklog to

post stories in your local time, then set your local
// timezone here.
//
// Please note

that this does not work when safe_mode is on!
//
// For more information, see this

discussion on geeklog.net:
//

http://www.geeklog.net/forum/viewtopic.php?showtopic=21232
// $_CONF['timezone'] =

'Etc/GMT-6'; // e.g. 6 hours behind GMT


//

+---------------------------------------------------------------------------+
// | SITE

STATUS |
// |

|
// | To disable your

Geeklog site quickly, simply set this flag to false |
//

+---------------------------------------------------------------------------+
$_CONF['site_enabled'] = true; // true or false

// Message shown when site is down
//

When this starts with 'http:' visitors are redirected to that URL
$_CONF['site_disabled_msg'] = 'Geeklog Site is down. Please come back soon.';

//

+---------------------------------------------------------------------------+
// |

SESSION SETTINGS |
// |

|
// | cookie_ip will

store md5(remoteip + randomnum) as the session ID in the |
// | cookie. This is more

secure but will more than likely require dialed up |
// | users to login each and every

time. If ipbasedsessid is turned off |
// | (which it is by default) it will just

store a random number as the |
// | session ID in the cookie.

|
// |

|
// | default_perm_cookie_timeout is how long you want the permanent

cookie |
// | to persist for (in seconds). This can be overridden by the user in

|
// | their user prefs if they want. If you set the default to 0, users will |
// |

have to log in again once their session expired. |
// |

|
// |

session_cookie_time is how long you want the session cookie to persist |
// | for.

Only really useful in scenarios where you don't want to allow |
// | permanent

cookies |
//

+---------------------------------------------------------------------------+

$_CONF['cookie_session'] = 'gl_session';
$_CONF['cookie_name']

= 'geeklog';
$_CONF['cookie_password'] = 'password';
$_CONF['cookie_theme'] = 'theme';
$_CONF['cookie_language']

= 'language';
$_CONF['cookie_lastvisit'] = 'LastVisit';
$_CONF['cookie_lastvisittemp'] = 'LastVisitTemp';

$_CONF['cookie_ip']

= 0;
$_CONF['default_perm_cookie_timeout'] = 28800;
$_CONF['session_cookie_timeout'] = 7200;
$_CONF['cookie_path'] =

'/';
$_CONF['cookiedomain'] = ''; // e.g. '.example.com'
$_CONF['cookiesecure'] = 0;

// Geeklog keeps track of when a user last

logged in. Set this to false
// if you don't want that.
$_CONF['lastlogin']

= true;


//

+---------------------------------------------------------------------------+
// | This

is really redundant but I am including this as a reminder that those |
// | people

writing Geeklog Plug-ins that are OS dependent should check either |
// | the $_CONF

variable below or PHP_OS directly. If you are writing an |
// | addon that is OS

specific your addon should check the system is using the |
// | right OS. If not, be

sure to show a friendly message that says their GL |
// | distro isn't running the right

OS. Do not modify this value |
//

+---------------------------------------------------------------------------+

$_CONF['ostype'] = PHP_OS;


// Note: PDF conversion didn't make it into this release.

Leave as is.
$_CONF['pdf_enabled'] = 0;


//

+---------------------------------------------------------------------------+
// | SEARCH

SETTINGS |
// |

|
// | These aren't really used

at the moment - leave as is ... |
//

+---------------------------------------------------------------------------+

//

Indicates if we should expand search results or not.
// true = show title with

summary
// false = title date author hits on one line
$_CONF['expanded_search_results'] = true;

// 0: use users max stories per page
//

1: Show all
// any other number is the # of results per page
$_CONF['max_search_results']

= 1;

// maximum length for the summary text for search results should be
$_CONF['summary_length'] = 250;


//

+---------------------------------------------------------------------------+
// |

MISCELLANEOUS SETTINGS |
// |

|
// | These are other

various Geeklog settings. The defaults should work OK |
// | for most situations.

|
//

+---------------------------------------------------------------------------+

// this

lets you select which functions are available for registered users only
$_CONF['loginrequired'] = 0; // all of them, if set to 1 will override all else
$_CONF['submitloginrequired'] = 0;
$_CONF['commentsloginrequired'] = 0;
$_CONF['linksloginrequired'] = 0;
$_CONF['pollsloginrequired'] = 0;
$_CONF['calendarloginrequired'] = 0;
$_CONF['statsloginrequired'] = 0;
$_CONF['searchloginrequired'] = 0;
$_CONF['profileloginrequired'] = 0;
$_CONF['emailuserloginrequired'] = 0;
$_CONF['emailstoryloginrequired'] = 0;

//

Submission Settings

// enable (set to 1) or disable (set to 0) submission queues:
$_CONF['storysubmission'] = 1;
$_CONF['linksubmission'] = 1;
$_CONF['eventsubmission'] =

1;
$_CONF['usersubmission'] = 0; // 1 = new users must be approved

// When set to 1,

this will display an additional block on the submissions page
// that lists all stories

that have the 'draft' flag set.
$_CONF['listdraftstories'] = 0;

// Send an email

notification when a new submission has been made. The contents
// of the array can be any

combination of 'story', 'comment', 'link', 'event',
// and 'user'.
// Example:

$_CONF['notification'] = array ('story', 'link', 'event');
// The email will be sent to

$_CONF['site_mail'] (see above).
$_CONF['notification'] = array ();

$_CONF['postmode']

= 'plaintext'; // can be 'plaintext' or 'html'
$_CONF['speedlimit'] = 45;

// in seconds
$_CONF['skip_preview'] = 0; // If = 1, allow user to submit comments and

stories without previewing


// Topic Settings

// Topics can be assigned a sort number

so that you can control what order they
// appear in the 'Topics' block on the homepage.

If you prefer you can also
// have this sort alphabetically by changing the value to

'alpha' (default is
// by 'sortnum'

$_CONF['sortmethod'] = 'sortnum'; // or 'alpha'

//

Show the number of stories in a topic in Topics Block
$_CONF['showstorycount'] = 1;

//

Show the number of story submissions for a topic in Topics Block
$_CONF['showsubmissioncount'] = 1;

// Hide 'Home' link from Topics block (if set to 1)
$_CONF['hide_home_link'] = 0;

// Show blocks for empty search results
$_CONF['showemptysearchresults'] = 0;


// Who's Online block settings

// How long an

anonymous (guest) user session is good for
$_CONF['whosonline_threshold'] = 300; // in

seconds

// Show full names (= 1) or usernames (= 0) in Who's Online block
$_CONF['whosonline_fullname'] = 0; // 1 = show full names, 0 = usernames

// If set to 1,

don't show names of registered users to anonymous users
$_CONF['whosonline_anonymous'] =

0; // 1 = don't show names to anon. users


// "Daily Digest" settings

// Let users get

stories emailed to them
// Requires cron and the use of php as a shell script
$_CONF['emailstories'] = 0;

// Specify length of stories in those emails:
// 0 = send

only title + link, 1 = send entire introtext,
// any other number = max. number of

characters per story
$_CONF['emailstorieslength'] = 1;

// New users get stories emailed

to them per default (= 1) or not (= 0)
$_CONF['emailstoriesperdefault'] = 0;


// When

user submission is activated, allow users from these domains to
// register without

having to go through the submission queue.
$_CONF['allow_domains'] = ''; // e.g.

'mycompany.com,myothercompany.com'

// Following times are in seconds
$_CONF['newstoriesinterval'] = 86400; // = 24 hours
$_CONF['newcommentsinterval'] =

172800; // = 48 hours
$_CONF['newlinksinterval'] = 1209600; // = 14 days

// Set to 1

to hide a section from the What's New block:
$_CONF['hidenewstories'] = 0;
$_CONF['hidenewcomments'] = 0;
$_CONF['hidenewlinks'] = 0;
$_CONF['hidenewplugins'] =

0;

// Link to the documentation from the Admin block (0 = hide link, 1 = show)
$_CONF['link_documentation'] = 1;

// Calendar Settings
$_CONF['personalcalendars'] =

1;
$_CONF['showupcomingevents'] = 1;
$_CONF['upcomingeventsrange'] = 14; // days
$_CONF['event_types'] =

'Anniversary,Appointment,Birthday,Business,Education,Holiday,Meeting,Miscellaneous,Person

al,Phone Call,Special Occasion,Travel,Vacation';

// Story Settings
$_CONF['maximagesperarticle'] = 5;
$_CONF['limitnews'] = 10;
$_CONF['minnews'] = 1; // minimum number of stories per page
$_CONF['contributedbyline'] = 1; // If 1, show contributed by line
$_CONF['article_image_align'] = 'right'; // Topic icon on left or right.
$_CONF['hideemailicon'] = 0; // If 1, hide "email story" option
$_CONF['hideprintericon'] = 0; // If 1, hide "printer friendly" option


//

Advanced theme settings
// It is recommended to leave these unchanged and overwrite them

in the theme's
// functions.php instead.

// When set to 1, this will render the first

story on any page using the
// templates for featured stories - even if that story is not

featured.
$_CONF['showfirstasfeatured'] = 0;

// When set to 1, this will make the

{left_blocks} variable available in
// footer.thtml (and disable it in header.thtml).

This is really only useful
// for two-column layouts where you want the left column

contain the stories
// and the right column contain the standard blocks.
$_CONF['left_blocks_in_footer'] = 0;

//

+---------------------------------------------------------------------------+
// | RSS

feed settings |
// |

|
// | Settings for RSS

feeds (aka RDF feeds). Please note that most of these |
// | are merely default

settings for the feeds created from the "Content |
// | Syndication" entry in the

Admin's menu. |
//

+---------------------------------------------------------------------------+

$_CONF['backend'] = 1; // 1 = activate feeds, 0 = off

// path to your site's

default RSS feed
$_CONF['rdf_file'] = $_CONF['path_html'] .

'backend/geeklog.rdf';

// This allows a person to limit the rss feed to a certain number

of stories
// (e.g. 10 or 12) or else limit the rss feed to all stories within a

certain
// period of time in hours (e.g. 24h or 168h).
$_CONF['rdf_limit'] = 10;

// number of stories (10) or hours (24h)

// Include the story's entire intro text in the

feed (= 1) or limit the number
// of characters from the intro text (any number > 1) or

don't include the text
// at all (= 0).
$_CONF['rdf_storytext'] = 0;

// Default language

for the feed - may have to be different than the locale
$_CONF['rdf_language'] =

'en-gb';


// Uncomment the following line to set the copyright year in the site's

footer
// to a specific year. Otherwise, the current year will be used.
//

$_CONF['copyrightyear'] = '2004';


// Optional Image Settings

// If you set

$_CONF['image_lib'] below, you must supply a path for the library
// you will use.

Setting this also assumes that if a photo is uploaded that is
// too big either by the

image sizes below or by overriding them using the
// upload object then the library you

choose will attempt to resize the image.
// Leaving this value empty disables this

feature
$_CONF['image_lib'] = ''; // can be one of 'netpbm', 'imagemagick', 'gdlib'

//

If you set image_lib to 'imagemagick' give the complete path to mogrify
// here (i.e.

including the name of the executable), otherwise comment it out
// NOTE: requires

ImageMagick version 5.4.9 (or newer)
//$_CONF['path_to_mogrify'] =

'/path/to/mogrify';

// If you set image_lib to 'netpbm' give the path to the netpbm

directory, you
// need the trailing slash here.
// NOTE: if you use NETPBM, use the

latest package from the Gallery package for
// your operating system found at

http://sourceforge.net/projects/gallery in
// the download section. You need to take the

netpbm tarball from them and
// uncompress the file which will create a netpbm directory.

If you plan to
// only use netpbm with Geeklog, put that entire folder in

/path/to/geeklog and
// adjust the path below. The only programs you need from netpbm

are giftopnm,
// jpegtopnm, pngtopnm, ppmtogif, pnmtojpeg, pnmtopng and pnmscale
//$_CONF['path_to_netpbm'] = '/path/to/netpbm/';

// Uncomment the following line

if you experience problems with the image
// upload. Debug messages will be added to the

error.log file.
// $_CONF['debug_image_upload'] = true;

// When set to 1, Geeklog will

keep the original, unscaled images and make
// the smaller image link to the unscaled

image.
$_CONF['keep_unscaled_image'] = 0; // 1 = keep original images

// Story image

settings
$_CONF['max_image_width'] = 160; // In pixels
$_CONF['max_image_height']

= 120; // In pixels
$_CONF['max_image_size'] = 1048576; // 1048576 = 1MB

//

User photo settings
$_CONF['max_photo_width'] = 128; // In pixels
$_CONF['max_photo_height'] = 128; // In pixels
$_CONF['max_photo_size'] =

65536; // 65536 = 64KB

// Comment Settings
$_CONF['commentspeedlimit'] = 45;
$_CONF['comment_limit'] = 100; // Default Number of Comments under Story
$_CONF['comment_mode'] = 'threaded'; // Default Comment Mode; from

'threaded','nested','nocomments',and 'flat'
// Allow / disallow comments to stories by

default (can be changed individually for every story)
$_CONF['comment_code'] =

0; // 0 = comments enabled, -1 = disabled

// Poll Settings
$_CONF['maxanswers'] =

10; // max. number of options in a poll
// 'submitorder' is the order in which answers

are saved in admin/poll.php
// 'voteorder' will list answers ordered by number of votes

(highest->lowest);
$_CONF['answerorder'] = 'submitorder';
$_CONF['pollcookietime']

= 86400;
$_CONF['polladdresstime'] = 604800;

// Password setting: minimum time

between two requests for a new password
$_CONF['passwordspeedlimit'] = 300; // seconds =

5 minutes

// Links Settings
// You can set both of the following to 0 to get back the

old (pre-1.3.6)
// style of the links section. Setting only linkcols to 0 will hide the
// categories but keep the paging. Setting only linksperpage to 0 will list
// all the

links of the selected category on one page.
$_CONF['linkcols'] = 3; // categories

per column
$_CONF['linksperpage'] = 10; // links per page

// Parameters for checking

HTML tags

// *** Warning: Adding the following tags to the list of allowable HTML can


// *** make your site vulnerable to scripting attacks!
// *** Use with care:



/* This is a list of HTML tags that

users are allowed to use in their posts.
* Each tag can have a list of allowed

attributes (see 'a' for an example).
* Any attributes not listed will be filtered, i.e.

removed.
*/
$_CONF['user_html'] = array (
'p' => array(),
'b' =>

array(),
'i' => array(),
'a' => array('href' => 1, 'title' => 1),
'em'

=> array(),
'br' => array(),
'tt' => array(),
'hr' => array(),


'li' => array(),
'ol' => array(),
'ul' => array(),
'code' => array(),


'pre' => array()
);

/* This is a list of HTML tags that Admins (site admin and story

admins) can
* use in their posts. It will be merged with the above list of

user-allowable
* tags ($_CONF['user_html']). You can also add tags that have already

been
* listed for the user-allowed HTML, so as to allow admins to use more
* attributes

(see 'p' for an example).
*/
$_CONF['admin_html'] = array (
'p' => array('class'

=> 1, 'id' => 1, 'align' => 1),
'div' => array('class' => 1, 'id' => 1),
'span'

=> array('class' => 1, 'id' => 1),
'table' => array('class' => 1, 'id' => 1, 'width'

=> 1, 'border' => 1,
'cellspacing' => 1, 'cellpadding' => 1),


'tr' => array('class' => 1, 'id' => 1, 'align' => 1, 'valign' => 1),
'th' =>

array('class' => 1, 'id' => 1, 'align' => 1, 'valign' => 1,


'colspan' => 1, 'rowspan' => 1),
'td' => array('class' => 1, 'id' => 1, 'align' =>

1, 'valign' => 1,
'colspan' => 1, 'rowspan' => 1)
);

// list of

protocols that are allowed in links
$_CONF['allowed_protocols'] = array ('http:',

'https:', 'ftp:');

// disables autolinks if set to 1
$_CONF['disable_autolinks'] = 0; //

0 = autolinks enabled

// Parameters for checking for "bad" words
$_CONF['censormode']

= 1;
$_CONF['censorreplace'] = '*censored*';
$_CONF['censorlist'] =

array('*censored*','*censored*','*censored*er','*censored*ing','*censored*','*censored*','*censored*','*censored*

','*censored*','*censored*','*censored*','*censored*','*censored*ing','mother*censored*er');


// IP lookup support
//
// If

$_CONF['ip_lookup'] contains the URL to a web-based service for IP
// address lookups,

Geeklog will let you click on IP addresses so that you
// can find out where a visitor

came from. This can either be a remote
// service or a plugin like Tom Willet's

Nettools.
// The '*' in the URL will be replaced with the IP address to look up.
//
//

uncomment this line if you have Tom Willet's Nettools installed
// $_CONF['ip_lookup'] =

$_CONF['site_url'] . '/nettools/whois.php?domain=*';


// This feature, when activated,

makes some of Geeklog's URLs more crawler
// friendly, i.e. more likely to be picked up

by search engines.
// Only implemented for stories, static pages, and portal links right

now.
//
// Note: Works with Apache (Linux and Windows successfully tested).
//

Unresolvable issues with systems running IIS; known PHP CGI bug.
$_CONF['url_rewrite'] =

false; // false = off, true = on

// Define a few useful things for GL

// Story Record

Options for the STATUS Field
define('STORY_ARCHIVE_ON_EXPIRE', '10');
define('STORY_DELETE_ON_EXPIRE', '11');

if (!defined ('LB')) {
define('LB',"n");
}
if (!defined ('VERSION')) {
define('VERSION', '1.3.10');
}

$_STATES = array(


'--'=>'',
'AL'=>'Alabama',
'AK'=>'Alaska',
'AZ'=>'Arizona',


'AR'=>'Arkansas',
'CA'=>'California',
'CO'=>'Colorado',


'CT'=>'Connecticut',
'DE'=>'Delaware',
'DC'=>'District of Columbia',


'FL'=>'Florida',
'GA'=>'Georgia',
'HI'=>'Hawaii',


'ID'=>'Idaho',
'IL'=>'Illinois',
'IN'=>'Indiana',
'IA'=>'Iowa',


'KS'=>'Kansas',
'KY'=>'Kentucky',
'LA'=>'Louisiana',


'ME'=>'Maine',
'MD'=>'Maryland',
'MA'=>'Massachusetts',


'MI'=>'Michigan',
'MN'=>'Minnesota',
'MS'=>'Mississippi',


'MO'=>'Missouri',
'MT'=>'Montana',
'NE'=>'Nebraska',


'NV'=>'Nevada',
'NH'=>'New Hampshire',
'NJ'=>'New Jersey',


'NM'=>'New Mexico',
'NY'=>'New York',
'NC'=>'North Carolina',


'ND'=>'North Dakota',
'OH'=>'Ohio',
'OK'=>'Oklahoma',


'OR'=>'Oregon',
'PA'=>'Pennsylvania',
'RI'=>'Rhode Island',


'SC'=>'South Carolina',
'SD'=>'South Dakota',
'TN'=>'Tennessee',


'TX'=>'Texas',
'UT'=>'Utah',
'VT'=>'Vermont',
'VA'=>'Virginia',


'WA'=>'Washington',
'WV'=>'West Virginia',
'WI'=>'Wisconsin',


'WY'=>'Wyoming'
);

?>

Some of it may not look right but the slashes are messed up on these boards