Welcome to Geeklog, Anonymous Wednesday, November 27 2024 @ 12:37 pm EST
Geeklog Forums
TAG plugin BUG
Sunny
Anonymous
I just faced an issue with the TAG plugin,
I posted an article with a future date (so that it gets published at a later time)
But the Tags on the post has been picked up by the plugin and displays the same in the results.
I have had warnings from Google Webmaster in the past for stories with future dates getting submitted to the search engine. This means Google recognizes the date of the article as mentioned on the article page...
I posted an article with a future date (so that it gets published at a later time)
But the Tags on the post has been picked up by the plugin and displays the same in the results.
I have had warnings from Google Webmaster in the past for stories with future dates getting submitted to the search engine. This means Google recognizes the date of the article as mentioned on the article page...
10
8
Quote
Status: offline
beewee
Forum User
Full Member
Registered: 08/05/03
Posts: 969
Location:The Netherlands, where else?
Oops, even if I remove the Tags, I can still see (while logged out!) the whole story, which will be published next monday!
After that, I disabled a the plugin, made a new story for August 2008 and anyone can see it....! Let's have a look at the demo site, to see if it's a Geeklog bug!!
EDIT: It's a Geeklog bug I'm afraid. I'm logged in at the demosite with IE, made a story for August 2008 and anyone can see it already!!
Dutch Geeklog sites about camping/hiking:
www.kampeerzaken.nl | www.campersite.nl | www.caravans.nl | www.caravans.net
After that, I disabled a the plugin, made a new story for August 2008 and anyone can see it....! Let's have a look at the demo site, to see if it's a Geeklog bug!!
EDIT: It's a Geeklog bug I'm afraid. I'm logged in at the demosite with IE, made a story for August 2008 and anyone can see it already!!
Dutch Geeklog sites about camping/hiking:
www.kampeerzaken.nl | www.campersite.nl | www.caravans.nl | www.caravans.net
15
12
Quote
Status: offline
Dirk
Site Admin
Admin
Registered: 01/12/02
Posts: 13073
Location:Stuttgart, Germany
Not good :shock:
http://project.geeklog.net/tracking/view.php?id=678
The draft flag doesn't seem to have an effect either. As a workaround: Uncheck the "Anonymous R" flag.
bye, Dirk
http://project.geeklog.net/tracking/view.php?id=678
The draft flag doesn't seem to have an effect either. As a workaround: Uncheck the "Anonymous R" flag.
bye, Dirk
10
15
Quote
Status: offline
beewee
Forum User
Full Member
Registered: 08/05/03
Posts: 969
Location:The Netherlands, where else?
That's too bad, there are people already using GL1.5 on a production site...
I've just ordered my webdesign department to install GL1.5 and port one of our largest sites to GL. Any idea when it's fixed in CVS? This is quite annoying since I have to port 3 large sites to GL in August. They have to be ready in September before a large fair. My collegues will try to update the Autotags plugin, but there's hardly any time for more bugs to resolve since they also have to copy, paste and redesign hundreds of HTML pages to the Static Pages.
Dutch Geeklog sites about camping/hiking:
www.kampeerzaken.nl | www.campersite.nl | www.caravans.nl | www.caravans.net
I've just ordered my webdesign department to install GL1.5 and port one of our largest sites to GL. Any idea when it's fixed in CVS? This is quite annoying since I have to port 3 large sites to GL in August. They have to be ready in September before a large fair. My collegues will try to update the Autotags plugin, but there's hardly any time for more bugs to resolve since they also have to copy, paste and redesign hundreds of HTML pages to the Static Pages.
Dutch Geeklog sites about camping/hiking:
www.kampeerzaken.nl | www.campersite.nl | www.caravans.nl | www.caravans.net
12
18
Quote
Status: offline
Dirk
Site Admin
Admin
Registered: 01/12/02
Posts: 13073
Location:Stuttgart, Germany
Quick'n'dirty fix (no guarantees, but looks good):
Re-activate this piece of code in article.php:
$A['perm_owner'], $A['perm_group'], $A['perm_members'],
$A['perm_anon']);
if (($access == 0) OR !SEC_hasTopicAccess ($A['tid']) OR
(($A['draft_flag'] == 1) AND !SEC_hasRights ('story.edit'))) {*/
i.e. remove the /* and */ (lines 129ff) and then duplicate these three lines at the end of the file:
$display .= COM_refresh($_CONF['site_url'] . '/index.php');
}[code]
i.e. so that you have that block of code twice.
bye, Dirk
Re-activate this piece of code in article.php:
Text Formatted Code
/*$access = SEC_hasAccess ($A['owner_id'], $A['group_id'],$A['perm_owner'], $A['perm_group'], $A['perm_members'],
$A['perm_anon']);
if (($access == 0) OR !SEC_hasTopicAccess ($A['tid']) OR
(($A['draft_flag'] == 1) AND !SEC_hasRights ('story.edit'))) {*/
i.e. remove the /* and */ (lines 129ff) and then duplicate these three lines at the end of the file:
Text Formatted Code
} else {$display .= COM_refresh($_CONF['site_url'] . '/index.php');
}[code]
i.e. so that you have that block of code twice.
bye, Dirk
15
18
Quote
Status: offline
THEMike
Forum User
Moderator
Registered: 07/25/03
Posts: 141
Location:Sheffield, UK
Text Formatted Code
Index: system/classes/story.class.php
===================================================================
RCS file: /cvsroot/geeklog/Geeklog-1.x/system/classes/story.class.php,v
retrieving revision 1.29
diff -u -r1.29 story.class.php
--- system/classes/story.class.php 22 Jun 2008 20:23:07 -0000 1.29
+++ system/classes/story.class.php 3 Jul 2008 18:58:29 -0000
@@ -495,6 +495,8 @@
return STORY_PERMISSION_DENIED;
} elseif ($this->_access == 2 && $mode != 'view') {
return STORY_EDIT_DENIED;
+ } elseif ((($this->_access == 2) && ($mode == 'view')) && (($this->_draft_flag == 1) || ($this->_date > time()))) {
+ return STORY_INVALID_SID;
}
} else {
return STORY_INVALID_SID;
@@ -801,6 +803,9 @@
function loadSubmission()
{
$array = $_POST;
+
+ $this->_expire = time();
+ $this->_expiredate = 0;
// Handle Magic GPC Garbage:
while (list($key, $value) = each($array))
15
15
Quote
Status: offline
Laugh
Site Admin
Admin
Registered: 09/27/05
Posts: 1470
Location:Canada
There are several bugs with the plugin which I posted over here a while ago.
http://www.gllabs.org/forum/viewtopic.php?showtopic=8090
Deleting of tags in the admin interface doesn't work.
Character Set problem.
Related Draft stories are visible when you click on a tag in the cloud.
I also sometimes get blank items in the list of stories when you click on a tag in the cloud
I've emailed the author but heard nothing back so I am not sure if these issues will be fixed anytime soon.
One of the Geeklog Core Developers.
http://www.gllabs.org/forum/viewtopic.php?showtopic=8090
Deleting of tags in the admin interface doesn't work.
Character Set problem.
Related Draft stories are visible when you click on a tag in the cloud.
I also sometimes get blank items in the list of stories when you click on a tag in the cloud
I've emailed the author but heard nothing back so I am not sure if these issues will be fixed anytime soon.
One of the Geeklog Core Developers.
14
12
Quote
Sunny
Anonymous
I couldn't get the issues with the draft... A draft when posted with the Tags does appear in the Tag Cloud but the access to the same is denied to non admins (on my GL 1.4.1).
As for post dated articles the link was always active but since the URL is not published anywhere it is not visited by anyone, and the same is used by me to give preview of the articles coming up to others(I thought its normal lol) ...
neways /// Is the fix that is posted above working?
As for post dated articles the link was always active but since the URL is not published anywhere it is not visited by anyone, and the same is used by me to give preview of the articles coming up to others(I thought its normal lol) ...
neways /// Is the fix that is posted above working?
12
10
Quote
All times are EST. The time is now 12:37 pm.
- Normal Topic
- Sticky Topic
- Locked Topic
- New Post
- Sticky Topic W/ New Post
- Locked Topic W/ New Post
- View Anonymous Posts
- Able to post
- Filtered HTML Allowed
- Censored Content